|
|
|
|
|
|
|
|
Air Traffic Control (7110.65) | ATC | Effective: | 07-15-99 | Updated: | 04-02-99 |
---|
Clear an arriving aircraft to a clearance limit by specifying the following:
a. Name of fix or airport.
b. Route of flight including a STAR/FMSP and STAR/FMSP Transition, if appropriate. Assign a STAR and STAR Transition to any aircraft in lieu of other routes; e.g., airways or Preferential Arrival Routes when the routings are the same. Assign a FMSP or FMSP Transition to any appropriately equipped aircraft. The clearance shall include the name, the current number, and the transition, if necessary, of the STAR or FMSP to be flown.
PHRASEOLOGY-
(STAR/FMPS name and number) ARRIVAL.
(STAR/FMPS name and number) ARRIVAL,
(transition name) TRANSITION.
EXAMPLE-
"Rosewood One arrival."
"Rosewood One arrival, Delta transition."
NOTE-
If a civil pilot does not wish to use a STAR or FMSP issued in an ATC clearance or any other STAR or FMSP published for that location, the pilot is expected to advise ATC.
c. Altitude instructions, as follows:
1. Assigned altitude if needed
or
2. Instructions to vertically navigate on the STAR/FMSP or STAR/FMSP transition.
EXAMPLE-
"Bayview Three RNAV Arrival, Helen Transition, maintain Flight Level Three Three Zero."
"Descend via the Civit One Arrival."
"Cross JCT at Flight Level Two Four Zero."
"Descend via the Coast Two Arrival."
"CIVET One Arrival, Descend and Maintain Flight Level Two Four Zero."
REFERENCE-
FAAO 7110.65, ALTITUDE INFORMATION, Para 4-5-7.
AIM, STANDARD TERMINAL ARRIVAL (STAR), FLIGHT MANAGEMENT SYSTEM PROCEDURES (FMSP) FOR ARRIVALS, Para 5-4-1.
d. Issue holding instructions, EFC, and additional delay information as required.
e. Instructions regarding further communications as appropriate.
REFERENCE-
FAAO 7110.65, RADIO COMMUNICATIONS TRANSFER, Para 2-1-17.
GO TO TOP OF PAGE |
---|